|
Synchronized Control
Synchronized pulse control multiplies the frequency of a pulse input by a preset scaling factor and generates a synchronized pulse output at that frequency. The scaling factor can be changed from the ladder program, so packaging can continue while adjusting the feed rate of packaging film or the position of labels.
|
|
High Speed Processing
High-speed processing include the 50-ตs quick-response inputs, improved scan time (up to 500 program steps in 1 ms), and interrupts. Improved processing can increase productivity; for example, the timing between detection of a label mark and detection of the product can be adjusted.
|
|
High Speed Counters
The CPM2A support one-axis high-speed counters(20kHz single-phase or 5kHz two-phase) and four-axis high speed counters(2 kHz single-phase only). The length of workpieces such as cardboard or string can be measured at high speed.
|
|
Position Control Functions
Supports a one-axis pulse output(10kHz) with trapezoidal acceleration and deceleration and two-axis simple pulse output.
|
|
Temperature Control and Monitoring
Mount a Temperature Sensor Unit to monitor and control temperatures using PID instruction operands and ON/OFF output signals sent with the PWM instruction. Use in combination with a PT for simple temperature monitoring and setting.
|
|
Analog Control Function
Analog control is possible using the optional Analog I/O Unit which can be interfaced to wide range of I/O devices via analog voltage or current signal.. Input from pressure sensors. Output to inverters. Interfaces with a wide range of devices. |
|
Simultaneous Communication Interface
Resin Forming
Applies to the heater control by a forming machine for PET bottle or plastics.
|
|
Easy Maintenance
Resin Forming
Applies to the heater control by a forming machine for PET bottle or plastics. |
|
Powered by CX-Programmer
Simplify Programming with the Windows-based CX-Programmer
The CX-Programmer supports the development of multiple programs with a wide variety of monitoring and debugging functions. |
|
Distributed and Autonomous Control Solution
Faster and More Flexible Operation with Distributed Control Configuration
The CPM2A allows line additions, faster operation, and reduced system startup time. The production line can be made part of a distributed control system by connecting the optional CompoBus/S I/O Link Unit to the CPM2A. With distributed control, the production line can be converted to modular systems for reduced startup time and higher line speeds.
|
สถิติวันนี้ 
สถิติเดือนนี้ 
สถิติปีนี้ 
